LEVO I: Getting started and setting up

Welcome to LEVO! Now that you bought the machine that makes home infusion simpler, let's get into the simple steps to Set Up your LEVO I for first use!

1. Remove all outer and inner packaging from the LEVO. 
   
   
2. Set the LEVO on a flat & sturdy surface and plug the power cord into an electrical outlet.
   
   
3. Press and swipe the POWER button downwards to turn the machine on.
   
   
4. Open the lid by pressing down on it gently to release the spring latch. 
   
5. Rinse the removable parts inside the LEVO with warm, soapy water and dry before re-placing. 
   1. Metal reservoir & attached silicone nozzle
   2. Silicone stirrer
   3. Standard herb pod with cap
      
      *To remove the metal reservoir from the LEVO, hold down the RELEASE button on the keypad while lifting it UP and out.
      
      
6. Make sure the silicone nozzle is securely attached to the reservoir's spout and place back inside the LEVO.
   1. Hold down the RELEASE button on the keypad while lowering the reservoir down into place, directing the nozzle through the drain opening. Let go of the RELEASE button when the reservoir is securely in place.
      
      
7. Place the magnetic stirrer inside the reservoir on the center 'bump'.
   1. Ensure that the stirrer magnetically aligns in the very center of the reservoir (should not be off-center).
      
      
8. Place the standard herb pod inside the reservoir beside the PLACE POD HERE guideline.
   
   1. The herb pod’s bracket will magnetically cling to the reservoir at that marking.
      
      
9. Set your temperature reading to display in either Celsius or Fahrenheit.
   1. Toggle between Celsius and Fahrenheit by holding down the temperature '+' and '-' buttons at the same time for 1 second.
      
      
10. LEVO's sounds are on by default. We think you'll like them. However, you can mute all sounds by pressing time '+' and '-'  for 1 second.