To restart cycle 1, place back on base and press button once (white light). To restart cycle 2, place back on base and press & hold for 3 seconds (blue light).

<div data-block="true" data-editor="6qh4q" data-offset-key="6jn8v-0-0" id="isPasted" style="box-sizing: border-box; -webkit-font-smoothing: antialiased; color: rgb(27, 28, 29); font-family: Inter, &quot;Helvetica Neue&quot;, Arial, Helvetica, sans-serif; font-size: 14px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: pre-wrap; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;"><h3 data-offset-key="6jn8v-0-0" id="is-your-gummy-mixer-not-turning-on-or-mysteriously-shutting-off-mid-useplease-review-the-below-standard-gummy-mixer-use-to-be-certain-everything-has-been-acknowledged-and-covered-it-may-be-a-simple-small-fix">Is your Gummy Mixer not turning on, or mysteriously shutting off mid-use?&#xA0; Please review the below standard Gummy Mixer use to be certain everything has been acknowledged and covered. It may be a simple, small fix!&#xA0; </h3><ol><li id="isPasted">First, ensure Gummy Mixer is plugged in and sitting on its base.&#xA0;</li><li id="isPasted">For Cycle 1, you will press button once (quick button push) and white LED light will turn on.&#xA0;</li><li id="isPasted">To allow time for your device to heat up completely, stirring can take ~7 minute to begin in Cycle 1.&#xA0;</li><li id="isPasted">After ~7 minutes, the stirring will then cycle intermittently (starts and stops) as part of its design. This whole cycle takes 14-15 minutes to complete. </li><li id="isPasted">For Cycle 2, again ensure Gummy Mixer is plugged in and sitting on its base.&#xA0;</li><li id="isPasted">Press and hold button for 3 seconds, until blue LED light turns on.&#xA0;</li><li id="isPasted">There will be no heating in this cycle, and stirring will be consistent. This cycle takes 2 minutes. </li></ol><h4 id="note-keep-in-mind-whenever-the-gummy-maker-is-lifted-from-its-base-plate-this-will-reset-any-cycle-including-heating-in-progress-when-placed-back-on-its-base-plate-it-will-need-to-be-restartedstarted-the-cycle-too-early-orwant-to-reset-the-cyclethe-cycle-can-be-shut-off-and-reset-while-in-progress-by-pressing-the-gummy-mixer-button-once">&#x2733;&#xA0;Note: Keep in mind whenever the Gummy Maker is lifted from its base plate, this will reset any cycle, including heating, in progress. When placed back on its base plate, it will need to be restarted.&#xA0; Started the cycle too early or&#xA0;want to reset the cycle?&#xA0; The cycle can be shut off and reset while in progress by pressing the Gummy Mixer button once.</h4>To restart cycle&#xA0;1, place back on base and press button once (white light).To restart cycle&#xA0;2, place back on base and press &amp; hold for 3 seconds (blue light).</div>

Gummy Mixer Turning Off / Won't Turn On

The Gummy Candy Mixer does the majority of the stirring and mixing for you when making gummies, but you may still need to stir the mixture by hand just before transferring it to your gummy molds to ensure a smooth and even consistency in your finishe

The Gummy Candy Mixer does the majority of the stirring and mixing for you when making gummies, but you may still need to stir the mixture by hand just before transferring it to your gummy molds to ensure a smooth and even consistency in your finished candies.&#xA0;Using a kitchen utensil, gently stir the gummy mixture by hand inside the Gummy Candy Mixer for 5-10 seconds just before you add it to your molds. If you are using plastic droppers to transfer your mixture to your molds, we recommend stirring the mixture with your dropper as you go.&#xA0;PRO TIP: Try making a smaller batch of gummies at one time (just use 1/2 cup of dry LEVO gummy mix and cut the recipe instructions in half). The oil will stir in more easily and you can experiment with different flavors and colors of gummies in your molds!Make sure you are following the correct steps:1. Add your gummy mix and water to the Gummy Mixer. Put the lid on.2. Press the power button one time. The light will be white. This cycle will heat first for 7 minutes, then begin stirring. It won&apos;t stir right away, this is normal.3. After ~15 minutes the sound will beep and the first cycle will be complete.4. Add your oil to the Gummy Mixer. Put the lid on.5. Press and HOLD the power button for 3 seconds. The light will be blue.6. After ~2 minutes the sound will beep and the second cycle will be complete. <iframe width="100%" src="https://www.youtube.com/embed/SC_gPWYWB4I?&amp;wmode=opaque&amp;rel=0" frameborder="0" allowfullscreen class="fr-draggable"></iframe>

Oil Not Mixing Into Gummy Mix

Back to Homepage

LĒVO Help Docs

Troubleshooting Your Gummy Mixer

LĒVO I, LĒVO II, LĒVO II+, LĒVO C, LĒVO Lux & Gummy Mixer FAQ

Gummy Candy Mixer

Infusing with LĒVO

Potency Calculator

My Infusion is Not Strong Enough (Increasing Potency)

LĒVO Time & Temp Calculator

What Type of Oils Should I Infuse?

What Should I Not Use In My LĒVO?

Altitude and LĒVO Infusions

Should My Infusion Turn Green?

How To Store Infusions

Infusing with Shea Butter, Cocoa Butter, or Beeswax

Sediment in Infusion

Infusing with Honey

My Herb Looks Burned After Activation

How To Store Gummies

The LĒVO App

General FAQ & Resources

Which LĒVO Model Fits Your Needs?

LĒVO I Manual

LĒVO I

LĒVO II: Getting Started & Setting Up

LĒVO II: Dry Cycle

LĒVO II: Activate Cycle

LĒVO II: Infuse Cycle

Change Temperature from Fahrenheit (ºF) to Celsius (ºC)

Mute or Unmute the Sound Effects

Cleaning Your LĒVO II

How to Store Your LĒVO After Use

LĒVO II User Manual (PDF)

Using Your LĒVO II

LĒVO II Won’t Turn On

LĒVO II Leaking from Drain

LĒVO II Leaking from Inside

LĒVO Machine Drain Valve Does Not Open or Close

LĒVO Opening & Closing Lid

LĒVO Machine Stuck on Warming Up Mode

LĒVO Machine Insert or Remove Reservoir

LĒVO Machine Won't Stir / Stops Stirring

LĒVO Machine Bad Smell

LĒVO Machine Making Loud Noise

LĒVO Machine Drain Tube Broken or Stuck in Machine

LĒVO Machine Clogged Nozzle/Cannot Drain Infusion

LĒVO Close Lid Error

Troubleshooting LĒVO II

LĒVO II

LĒVO II+ Manual

LĒVO II+

LĒVO C: Activate Cycle

LĒVO C: Infuse Cycle

How To Clean Your LĒVO C

LĒVO C User Manual (PDF)

Using Your LĒVO C

LĒVO C Doesn't Turn On

LĒVO C Basin Accidentally Overfilled

LĒVO C Red Light is Still on After Completing Infusion

Can I Adjust the Time/Temp on the LĒVO C's Activate Cycle?

I Smell Burnt Butter or Oil When Using My LĒVO C

LĒVO C Cycle Won't Start

LĒVO C Basin Lid Doesn't Fit with the Jumbo Pod

Selected The Wrong Cycle On My LĒVO C

LĒVO C Stuck Warming Up

Troubleshooting LĒVO C

LĒVO C

LĒVO Lux: Getting Started & Setting Up

How to Clean Your LĒVO Lux

LĒVO Lux: Dry+ Cycle

LĒVO Lux: Activate Cycle

LĒVO Lux: Infuse Cycle

LĒVO Lux: Dispense Your Infusion

LĒVO Lux User Manual (PDF)

Using Your LĒVO Lux

LĒVO Lux Won't Turn On

LĒVO Lux Insert or Remove Reservoir

LĒVO Lux Stuck on Warming Up Mode

LĒVO Lux Leaking from Drain

LĒVO Lux Leaking from Inside

LĒVO Lux Machine Broken Lid

Troubleshooting LĒVO Lux

LĒVO Lux

Gummy Candy Mixer User Manual

How to Use LĒVO Gummy Mix in the Mixer

Using Your Gummy Mixer

How To Earn & Redeem Loyalty Points

How To Update, Edit or Cancel Orders

Logging Into Your LĒVO Account

Shipping Policy

Didn't Receive My Order Confirmation Email

Tracking Your Order

International Orders

Accepted Payment Methods

Orders

Warranty Claims

Return Requests

Product Registration

Returns & Warranty Claims